GE Everest XLG3 VideoProbe Operating Manual page 20

12 Chapter 1 Introduction
Base Unit, Sides
Left Side
Item
A. Funnel
B. Shoulder-strap hooks
C. AC power inlet
D. AC fuse
E. Ground lug
F. AC output
G. Battery (DC) input
H. Battery (DC) fuse
I. Internal memory card
A. Funnel
B. Shoulder-strap
hooks
C. AC power inlet
D. AC fuse
E. Ground lug
Description
Guides the insertion tube into the storage reel.
Strap is included.
For connecting the power cord.
Protects the circuitry when using AC power.
Provides an earth ground if one is not available through the AC outlet.
IEC-type F connector. The voltage and frequency of the power available at the AC output is
the same as the voltage and frequency applied to the inlet. Maximum output is 100 W.
For connecting a battery (optional).
Protects the circuitry when using a battery or other DC power source.
Card is in the drive behind the access panel. This card contains the operating system
software and the memory for storing images. This card is not user serviceable.
GE Inspection Technologies XLG3 VideoProbe System
Right Side
F. AC output G. Battery (DC)
input
I. Internal
memory
card
H. Battery (DC)
fuse