Table of Contents
Advertisement
User Manual
8. Wrap handset cable around the top of the base unit.
Holding the loop in your hand, wrap the cable clockwise under the first lug. Tuck the
cable under the insertion tube. Hook it around the other lug.
9. Pack the system into the case.
a. Verify that no accessories or cords are installed in any of the connectors on the
b. Pack components securely into case so that no parts will be pinched in the lids.
c. If you have 6-inch or 12-inch rigidizers, insert them into the holes on the back of
d. Close the lids.
front panel.
the case. The 6-inch rigidizer rests in the groove. The 12-inch rigidizer sticks out
at the bottom end.
Caution If you do not pack the system carefully, as described here, damage
might occur.
a, b
Chapter 3 Setting Up and Putting Away the System
c
33
Lugs
d
Advertisement
Table of Contents
Troubleshooting
