Reviewing Settings For The System - GE Everest XLG3 VideoProbe Operating Manual

44 Chapter 4 Setting Up the Software

Reviewing Settings for the System

1. Press
2. Select Setup Menu > System.
3. Select the desired item:
Item
System Info
Language
Time/Date
Steering
MDI
Update
Software
Feature
Update
Video Output
Format
LCD Display
.
Choices Description
System information appears:
• Total memory capacity
• Remaining memory
• Software revision levels
• Language
Select Choose from a list of languages.
Load System automatically installs a language file from an external storage device,
if any. You must then select the language.
Show On, off.
Set Change the time or date. Time is always in 24-hour format. Date is always in
day/month/year format.
Tip Map On, off. The tip map is a grid that indicates probe-tip position.
Zoom Mode Steer Only — In this mode, when you move the joystick in a zoomed live
view, the probe tip articulates. The image changes as the camera moves.
Pan Only — In this mode, when you move the joystick in a zoomed live view,
the probe tip does not articulate. The image changes as the system
electronically pans the camera's full view.
Load, Unload Load or unload an existing inspection on the XLG3.
Annotate -- On, If off, the menu-directed inspection on-screen prompts are not saved in the
Off image.
For use with the XLG3 Update Software CD-ROM or thumbdrive.
For use with the XLG3 Feature Installation CD-ROM or thumbdrive.
NTSC Standard in US and elsewhere.
PAL Standard in Europe and elsewhere.
Full The image fills the screen. The top and bottom are cropped. There are no
black bands at the sides.
4x3 The complete image that the camera "sees" is displayed. The top and bottom
are not cropped. There are bands of black at the sides.
Unscaled The image nearly fills the screen. The top and bottom are slightly cropped;
there are narrow bands of black at the sides. Unscaled is automatically
selected when measuring for most accurate placement of cursors.
GE Inspection Technologies XLG3 VideoProbe System