Maintaining The Battery - GE Everest XLG3 VideoProbe Operating Manual

122 Chapter 8 Maintenance

Maintaining the Battery

To Check the Battery's Charge Level
While the battery is in use, press the charge-check button. The green and red LEDs light
up according to the battery's charge level, as shown here.
LED Status
Green on
Red on
Red flashing
Both off
These two LEDs do not light up until you press the button.
To Remove the Battery
1. Turn off the power switch.
2. Unplug the DC power connector.
3. Turn the quarter-turn stud counterclockwise.
4. Remove the battery.
DC power connector
Battery Charge Level
> 80%
< 80%
Very low
No charge
E
Charge-check button
E F
GE Inspection Technologies XLG3 VideoProbe System
F
Charge-level LEDs
Quarter-turn stud