Changing The Probe - GE Everest XLG3 VideoProbe Operating Manual

30 Chapter 3 Setting Up and Putting Away the System

Changing the Probe

To Remove a Probe
1. Shut down the probe.
a. While viewing a live or frozen image, press
b. Select Probe Shut Down.
2. Open the probe latch. The probe pops out slightly.
3. Gently slide the probe out of the handset.
To Install a Probe
1. Open the probe latch.
2. Slide the probe into the handset.
3. Close the latch.
GE Inspection Technologies XLG3 VideoProbe System
.
Latch
(partially open)