Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
Telephone base installation
Plug the large end of the telephone
base power adapter into a power outlet
not controlled by a wall switch.
Route the power adapter
cord through these slots.
Raise the antenna.
Charger installation
Plug the small end of the telephone
base power adapter into the power
adapter jack on the back of the
telephone base.
Plug the power adapter into a power outlet not
controlled by a wall switch.
Plug one end of the telephone line cord
Plug the other end of the
telephone line cord into the
telephone jack on the back
of the telephone base.
7
If you have DSL
high-speed Internet
(not included) is
required.
Route the telephone line
cord through this slot.