Answering System; Answering System Settings; Announcement - AT&T CL83519 User Manual

Answering system

Answering system settings

Use the answering system menu of a system handset or the telephone base
or message alert tone, activate call screening, or change the number of rings,
system and you change any setting in the answering system setup menu, the
answering machine automatically turns on again.
1. When the device is in idle mode, press MENU/
2. Press or
CID

Announcement

Your outgoing announcement plays when calls are answered by the answering
system.
The telephone has a default outgoing announcement, "
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
To play your current outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
menu.
2. Press or
CID
3. Press /SELECT again to select Announcement.
MENU
4. Press or
CID
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press or
CID
3. Press /SELECT again to select Announcement.
MENU
4. Press or
CID
to scroll to Answering sys, then press
DIR
" You can use this announcement, or record your own.
to scroll to Answering sys, then press
DIR
to scroll to Play annc, then press
DIR
to scroll to Answering sys, then press
DIR
to scroll to Play annc, then press
DIR
to enter the main menu.
SELECT
SELECT
80
/SELECT.
MENU
to enter the main
/SELECT.
MENU
/SELECT.
MENU
to enter the
SELECT
/SELECT.
MENU
/SELECT.
MENU