Call Intercept; Message Alert Tone - AT&T CL83519 User Manual

Answering system
About the answering system
Options while a message is being recorded:
Press VOL
volume.
Press /CANCEL to temporarily silence the call screening.
OFF
Press /SELECT to temporarily turn on the call screening if call screening
MENU
Press /SPEAKER to broadcast the announcement and the incoming message

Call intercept

While screening a call, you can stop recording and speak to the caller by pressing
PHONE/
FLASH
If the message alert tone is turned on, the telephone base beeps every ten
seconds when there are new messages. Pressing any telephone base key
temporarily silences the message alert tone.
If you press MUTE/
message alert tone, there is a voice prompt directing you to press
/DELETE again to delete all old messages. The message alert tone is
MUTE
old messages in your answering system.
The message alert tone resumes when you receive another message.
or VOL
CID DIR
on the handset or
DELETE
MUTE
on the handset to adjust the call screening
/SPEAKER on the telephone base.
/DELETE a second time if you wish to erase all
90