AT&T CL83519 User Manual page 41

Multiple handset use
Intercom
Using the telephone base:
1. When the telephone base is not in use, press MENU/
menu. Press
If you have one handset and no other registered devices, the telephone
base shows Calling HANDSET X.
If you have cordless headset(s)/speakerphone(s) or more than one
handset, the telephone base shows INTERCOM TO:. Use the dialing keys
to enter a specific handset number (1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, # for a single headset/speakerphone, # followed
by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all
devices), or press
/SELECT. The telephone base shows Calling HANDSET X or Calling
MENU
all handsets.
The destination device(s) rings and shows BASE 0 is calling or
BASE 0 is calling all.
2. To answer the intercom call, press PHONE/
dialing key (0-9, TONE , or # ) on the destination handset. Both the base and
the handset now show Intercom.
3. To end the intercom call, one party presses OFF/
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
Notes:
For cordless headsets and speakerphones, refer to the corresponding user's manual on how to answer and end an
intercom call.
If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base, they appear as
HEADSET 1 and HEADSET 2, respectively, in the intercom menu.
or to scroll to Intercom, then press
CID DIR
or
CID
to scroll to the desired device and press
DIR
FLASH
35
to enter the main
SELECT
/SELECT.
MENU
, /SPEAKER or any
, or places the
CANCEL