Warranty; Troubleshooting - Chicco Dream Cradle Instructions For Use Manual

connection is established with the first device on which the
application is opened.
LED OPERATION
STATUS
Device ON:
Programme running:
No power-off:

TROUBLESHOOTING

PROBLEM
The Dream Cradle application does not
connect
There is a red circle on the Bluetooth
button
LED COLOUR
Red

WARRANTY

Green
The product is guaranteed against any conformity defect
Off in normal conditions of use as stated in the instructions.
Therefore, the warranty does not apply in the case of dam-
age caused by improper use, wear or accidental events. For
the duration of the warranty on conformity defects please
refer to the specific provisions of applicable national laws in
the country of purchase, where appropriate.
SOLUTION
1. Check that there are no other smartphones already connected to The
Dream Cradle.
2. Check that The Dream Cradle is correctly connected to the electric net-
work and that The Dream Cradle button is lit.
3. The Bluetooth button of the application must be flashing; if it is red, you
®
must press it, so it becomes flashing yellow.
4. Perform the pairing procedure again between the smartphone The
Dream Cradle.
5. Switch The Dream Cradle off and on, using the specific button on the
back
6. Close the application on your smartphone and open it again.
1. Press the button so it becomes flashing yellow. If The Dream Cradle
is on and the pairing procedure was correctly performed, the button
will become solid green, indicating that the connection has been es-
tablished.
®
2. If the connection is not established, perform the pairing procedure
again
3. Switch The Dream Cradle off and on, using the specific button on the
back
4. Close the application on your smartphone and open it again.
10
STATUS
Request for association:
Association completed:
No power-off:
LED COLOUR
Flashing blue
Blue
Off