Warranty - Chicco Zip & Go Instructions For Use Manual

• D o not let other children play unat-
tended close to the cot.
• D o not place the cot onto a sloped
surface with your child inside.
• T o prevent it becoming trapped, do
not place the cot close to walls or
obstacles.
• T he cot must be kept away from
electrical cables and cords: do not
position close to windows where
cords, curtains or similar could pose
a suffocation or choking hazard. To
avoid all risks of strangulation, nev-
er give children objects with cords
or strings attached, or leave them
within their reach.
• P rolonged exposure to direct sun-
light can cause the colours of the
fabric to fade. After a prolonged ex-
posure of the product to high tem-
peratures, wait a few minutes prior
to putting your child in it.
• D o not close the cot when the child
is in it.
• K eep the product out of reach of chil-
dren when it is not in use.
COMPONENTS
A. Frame
B. Legs
C. Zip with buckle
D. Bag
E. Mattress
F. Straps with closing buckle
G. Feet extraction buttons (swing mode)
CARE AND MAINTENANCE
The fabric cover of the cot, mattress and bag can be completely
removed and washed.
WARNING: When covering or removing the cover of the cot take care
when handling the fabric parts so as to avoid accidental tears or damage.
WARNING: Covering or removing the cover of the cot may take a
few minutes and must be carried out by an adult.
Regularly inspect the toy for signs of wear and any damage. In the
case of damage do not use and keep out of reach of children.
Do not use solvents, abrasive or overly-aggressive products to clean
metal and plastic parts.
When washing the fabrics pay close attention to the instructions on
the label (summarised below):
Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Check that the fabric and the stitching are in good condition after
each wash.
HOW TO OPEN THE COT
1. Remove the frame (A) from the bag (D).
2. I nsert the legs (B) in the supports of the frame until an engage-
ment click is heard (Fig. 1).
3. A fter releasing the buckle (F), Fig. 2, open the frame (A) in the
direction of the arrows (Fig. 3). A double CLICK indicates that the
structure was opened and locked correctly.
4. T he straps and closing buckles can be put back in the pockets
located below the base of the cot (Fig. 4).
HEIGHT ADJUSTMENT OF THE BASE
The height of the base of the cot can be adjusted to two positions:
lifted (0-6 months), Fig. 5, and completely lowered (0-24 months),
(Fig. 6).
WARNING: When in its highest position the cot is intended for use by
children between the ages of 0 and 6 months (weighing up to 9 kg).
WARNING: When a child is able to sit, kneel or to pull themselves
up, the cot should no longer be used with the base in the higher
position; this should now be completely lowered.
5. T o adjust the height of the base of the cot, use the zipper (C) lo-
cated on the outside of the cot (Fig. 7 - 8 - 9). Open the zip com-
pletely to lower the base of the cot (Fig. 6). To use the cot with
the base completely lowered, the velcro straps located on the
mattress must be inserted and secured in the slots at the bottom
of the cot (Fig. 10-11-12).
By removing the mattress velcro straps from the base of the cot the
base of the cot will return to the raised position (Fig. 5).
HOW TO CLOSE THE COT
6. P ress the two buttons located in the centre on the top of the long
side of the cot (Fig. 13) and fold the cot in the direction of the arrows
(Fig. 14).
7. I nsert all the components inside the bag (D) for easy transport
(Fig. 15).
REMOVING THE COVER
8. R emove the mattress being careful to unfasten the velcro straps
as indicated in the "HEIGHT ADJUSTMENT OF THE BASE" paragraph.
9. T o remove the cover from the mattress, use the six zippers lo-
cated on the top edges of the cot (Fig. 16) and pull the plastic
elements off the corners, carefully removing the fabric from the
frame (Fig. 17).
10. R emove the central wooden slat from the pocket on the base
of the cot (Fig. 18).
11. T o remove the cover from the mattress open the cover, fastened
with velcro straps inside it (Fig. 19), delicately remove the wood-
en base and padding.
12. T o re-cover the product, follow these steps in reverse order.
ACTIVATING/DEACTIVATING SWING MODE
WARNING: This function may be used ONLY when the base of the
cot is in the lifted position (0 - 6 months).
13. T o activate this function, push the 4 buttons (G) down individual-
ly with one hand and lift each foot with the other hand (Fig. 20).
14. T o deactivate the swing function, push the 4 buttons (G) down
individually and lower the 4 feet (Fig. 21).

WARRANTY

12
The product is guaranteed against any conformity defect in normal
co
Th
cau
For
the
pu