LED goes out: charging pro-
4
cedure is finished, the char-
ging electronics switch over to
34
trickle charging.
LED flashes: ambient tempe-
rature outside of the permit-
ted range or battery is being
checked.
If the LED flashes:
Check the ambient tempera-
ture (see technical data) and
change charging location if ne-
cessary.
z
If the ambient temperature is
within the permitted range and
the LED flashes for longer than
five minutes, the battery is faulty:
Replace battery.
Once the battery is charged:
Disconnect the plug connec-
tion, replace the protective cap
and store the charging socket
under the neck pad.
NOTICE
The battery should be fully
charged from a low state of
charge within three hours to
ensure the service life and
maximum capacity of the
battery.
Need help?
Do you have a question about the Communication system and is the answer not in the manual?
Questions and answers