the green LED flashes as the
rate of one flash per second.
If the communication system
does not switch on:
Charge battery (
33).
If the red LED lights up and re-
mains ON after the system is
switched on, a system error has
occurred:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Press and hold button 2 for ten
seconds to restart the commu-
nication system.
Switch off
communication system
Press and hold button 2 until
a message indicates the bat-
tery charge and the red LED 4
starts flashing.
NOTICE
If the communication system fails
for 15 minutes to find any of the
Bluetooth devices with which it is
paired, it switches off automatic-
ally to save the batteries.
The communication system
switches itself off, the red LED
flashes three times.
Press and hold button 2 for ten
seconds to force the device to
switch off (e.g. in the event of
a system fault).
Adjust the volume
CAUTION
Communication system
which is set too loud
Risk of accident due to not hear-
ing other road users (particularly
special vehicles), hearing damage
Select the volume of the
communication system so
that traffic perception is not
impaired.
2
13
z
Need help?
Do you have a question about the Communication system and is the answer not in the manual?
Questions and answers