Pairing Of Telephone And Helmet; Met; And Helmet - BMW Motorrad Communication system Operating Instructions Manual

a slow flash, indicating that the
3
system is on standby.
If pairing is unsuccessful:
26
Switch off all other Bluetooth
devices in the immediate vi-
cinity and try to pair the two
helmets again.
NOTICE
It can take some time for a
z
Bluetooth device to be detected.
It is always best to activate the
search function as soon as
possible after activating visibility,
so that the searching device will
have as long as possible to find
the visible device.
If pairing is again unsuccessful:
Deleting pairing entries (
Run the pairing procedure
again.
Pairing of telephone

and helmet

If necessary, consult the oper-
ating instructions of your tele-
phone concerning its Bluetooth
functions.
Switch on communication sys-
tem and telephone.
30).
Press and hold button 2 and
button 3 of the communic-
ation system simultaneously
until the flash frequency of the
green LED 6 has increased
once (2 Hz flashing).
The communication system is
now visible to other Bluetooth
devices for a maximum of
60 seconds, the green LED
flashes twice per second.
Start the search function of the
telephone for other Bluetooth
devices.