BMW Motorrad Communication system Operating Instructions Manual page 27

Switch on the communication
systems of both helmets.
Simultaneously press button 2
and button 3 of one helmet
until the flashing speed of the
green LED 6 has increased
once.
The communication system of
the first helmet is now visible
to other Bluetooth devices for
a maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.
Simultaneously press and hold
button 2 and button 3 of the
second helmet until the flash-
ing speed of the green LED 6
has increased twice.
The communication system
of the second helmet now
searches for another visible
helmet for a maximum of 60
seconds; green LED 6 flashes
at a rate of four flashes per
second.
The green LED of the searching
helmet 2 flashes twice as fast
as the green LED of the visible
helmet 1.
If pairing is successful the
green LEDs of both helmets
light up for one second and the
voice connection is established.
A high-pitched confirmation
tone sounds in both helmets.
If pairing fails the red LED of
the searching helmet flashes
three times and a low-pitched
warning tone sounds. The
green LED then switches to
3
25
z