Connection From Music Play- Back Device To Helmet; Connection From Music Playback; Device To Helmet - BMW Motorrad Communication system Operating Instructions Manual

rupted. Communication between
2
the two helmets is restored, or
music playback resumed, as
18
applicable, as soon as the an-
nouncement is over.
Operation
Switch on the navigation device
and the communication sys-
tem.
Check the navigation device
to see if the connection has
z
automatically been established.
If there is no connection:
Check settings of the naviga-
tion device.
NOTICE
Some Bluetooth devices do not
support automatic connection
set-up.
If required, create the connec-
tion to the communication sys-
tem manually.
Connection from music
playback device to
helmet
Connection
Each helmet with a communic-
ation system can be paired with
a music device of its own, but a
music device can be paired with
only one communication system.
Remember that music playback
must be in the Bluetooth profile
A2DP format.
NOTICE
A2DP (Advanced Audio Distribu-
tion Profile) is a non-proprietary
technology that enables stereo
audio signals to be transmitted
by Bluetooth to a compatible
receiver.
The settings and options sup-
ported by the music device de-
termine whether or not connec-
tion setup between the helmet
unit and music device can take
place automatically. Always refer
to the operating instructions of
the device in question for details.
Note that the Bluetooth function
must be active; the communic-
ation system might have to be
authorised or authenticated.
NOTICE
Before the initial connection
setup, the participating Bluetooth