Close The Flip-Front Helmet; Check Microphone Alignment; Ment; Switch On Communication - BMW Motorrad Communication system Operating Instructions Manual

Close the flip-front
2
helmet
12
Before closing a flip-front hel-
met, position the microphone
in front of your mouth to pre-
vent it getting trapped during
closing. Then close the chin
section.
Check microphone
alignment
z
At regular intervals, check that
the microphone is aligned cor-
rectly with your mouth.
To do so, pull the wind de-
flector 1 away from the micro-
phone so that the white area 2
underneath is visible.
The white area must be facing
the mouth, the black area must
be facing away from the mouth.
If the microphone has become
twisted:
Position the goose neck along
with the microphone so that
the white area of the micro-
phone is facing your mouth.
To do so, twist the goose neck
inwards, but do not twist the
microphone against the goose
neck or the goose neck against
the bracket. If required, seek
the advice of a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
Switch on
communication system
Press and hold button 2 until a
message indicates the battery
charge and the green LED 6
starts flashing.
The communication system
initialises itself; the green LED
slow-flashes,
The communication system
then goes to standby mode;