Table of Contents
Advertisement
Section 3: Installation
The tether keeps the bottle filler secured to the frame when changing the
filter, if installed. Make sure the tether is installed properly to avoid
accidental damage to the unit.
6.
Before the Bottle Filler cabinet is set into place, feed the terminals on
the power supply power cord and the long green ground wire through
the bushing on the cooler top.
7.
Connect male terminals on the bottle filler power supply to female
terminals on power cord. Make sure that the power cord is firmly
connected to the power supply.
8.
Attach the long green ground wire to cooler power cord ground located
on cooler frame or to electrical box ground.
18
Hide quick links:
Advertisement
Table of Contents
