To Retrofit The Versafiller To An Existing Unit - Oasis Quasar PWEBQ Installation Instructions Manual

To retrofit the Versafiller to an existing unit, follow the
instructions below:
If the cooling tank is non-pressurized, then go to the "Pressurizing the
cooling tank" addendum section. Otherwise, proceed to step 1 below.
Non-pressurized units are single units made since December of 2009.
Refer to the schematic below to identify the system that you have.
Supply
Water
PRESSURIZED
COOLING TANK
1. With the cooler top removed, find the tube going from the cooling
tank outlet to the valve. The TEE fitting (supplied) will need to
connect between the cooling tank and valve.
Outlet Tube (insulated plastic)
P8AC family
Water
valve/
regulator
NON-
Valve
Supply
Water
PRESSURIZED
COOLING
TANK
Outlet Tube (insulated copper)
P8AM family
Water
valve/
regulator
Valve
11