HOW TO FOCUS THE OBJECT (Fig. 2.15)
c)
Bring object into rough focus using arm movements.
•
Rotate fine focusing knob 2 clockwise or anticlockwise to bring object into sharp focus.
•
If the object is outside the range of the fine focusing knob, bring the complete microscope in the focus
•
range by any of the following means:
a) Roll the mobile stand forward and backward.
b) Adjust the arm towards left - right and up - down.
c) Adjust the microscope angle left and right. For this loosen the head arm knob and rotate the microscope.
A combination of the above steps will give you the true desired focusing median.
On focusing the region of interest, change magnification through the magnification changing knob 1.
•
22
6128000-795
User's Manual Prima C/ Prima CS COLPOSCOPE
(Fig. 2.15)
Prima C/CS
Issue 2.0
Printed on Oct, 2016