Start-Up Screens - Vent-Axia Sentinel Kinetic MVHR Series Installation & Commissioning Manual

Start Up

Start-up Screens

Sentinel Kinetic Version Screen
The Sentinel Kinetic Version screen displays the
firmware version number for 3 seconds.
No adjustments are possible on this screen.
Language Screen
The Language screen displays the language used for
the screens. It is typically displayed for 5 seconds, or
longer if changing the setting.
(To re select a new language disconnect and then
reconnect to the mains supply).
Airflow Units Screen
The Airflow Units is a percentage of the unit's
maximum flow.
Wireless Control Screen
The Wireless Control screen automatically displays
whether the wireless boost control switch is fitted. It is
typically displayed for 3 seconds.
Humidity Sensor Screen
The Humidity Sensor screen displays whether the
humidity sensor is fitted. It is typically displayed for
3 seconds.
Low Airflow / Normal Airflow / Boost Airflow Screen
When the start-up screens are finished, the low or
normal screen is displayed showing operating status
(Low Airflow X % or Normal Airflow X % or Boost
Airflow X %).
The Normal screen displays the rate of normal airflow
(supply air) through the unit.
If the installation has proportional sensors or an internal
humidity sensor fitted, an
when humidity sensor is boosting the airflow.
When the summer bypass is active, the normal screen
top line will alternate (for 3 seconds) with Summer
Bypass On.
Every 3 months the normal screen top line will include
Check Filter as a reminder to check and, if necessary,
clean or replace the filters.
When this has been done, press and hold the
buttons for 5 seconds to reset the automatic
message.
Sentinel Kinetic MVHR Installation & Commissioning
α
symbol will be displayed
and
V--
Language
English
Airflow Units
%
Wireless Control
Not Fitted
Humidity Sensor
Not Fitted
Normal Airflow
30 %
Summer Bypass On
30 %
Check Filter
30 %
25