Safety Instructions For The Hot Air Blower; Safety Information For Solid Fuel Lighters; Additional Safety Instructions - FLORABEST FUV 2000 A1 Translation Of The Original Instructions

To avoid potential risks, damaged
■
mains cables should be replaced by
the manufacturer or the manufactur-
er's customer service department or
a similarly qualified person.
NOTE
Spare parts not listed (such
►
as switches and replacement
nozzles) can be ordered via our
call centre.
Safety instructions for the hot
air blower
NOTICE!
► This tool must be placed on its stand when
not in use.
Careless use of the appliance can
■
cause a fire.
Take care when using the appliance
■
in the vicinity of inflammable mate-
rials.
Do not aim at the same place for a
■
prolonged period of time.
Do not use in the presence of an
■
explosive atmosphere.
Heat can be transferred to combus-
■
tible materials which are hidden
from view.
Replace on stand after use and al-
■
low to cool before putting it away.
Do not leave the appliance unat-
■
tended while it is in operation.
│ GB │ IE
■ 14
Safety information for solid
fuel lighters
Check that the solid fuel lighter is
■
in the correct position.
Disconnect from mains before re-
■
moving from fire.
Allow solid fuel lighter to cool down
■
before packing away.
The power cable or other flamma-
■
ble materials may not come into
contact with hot components of the
solid fuel lighter.

Additional safety instructions

CAUTION! Avoid the risk of injury
or fire as well as health risks:
In case of danger, remove the plug
■
from the socket immediately.
CAUTION!
RISK OF INJURY!
Never use the appliance as a hair
►
dryer.
Never aim the hot air stream at
■
people or animals.
Never look directly into the nozzle
■
opening at the outlet .
CAUTION!
RISK OF BURNS!
Do not touch the hot nozzle.
►
Wear protective gloves.
■
Wear safety goggles.
■
FUV 2000 A1