Rinnai 4 burner Gourmet Customer's Operating And Assembly Instructions page 9

9
T R
12. Position the trolley and barbecue body to the
upright position.
13. Connect the trolley side shelves to the sides of the
upright assembled trolley and barbecue body
using 4 x 50 mm bolts and nuts to secure each shelf
securely. See diagram 4.
If side burner is supplied it must be connected to
the left side of barbecue body. Refer page 12 for side
burner gas piping installation.
Lift up side burner lid and be sure to remove the
cable tie from around the side burner before
igniting the side burner. The knob allows easy
opening and closing of the side burner lid; secure
in place using the screw provided.
14. Slide the fat/grease draining tray and fat/grease
receptacle under the barbecue body on the ledges
provided, from the back of the barbecue.
Fat/grease receptacle should be positioned centrally
under the fat/grease draining tray. See diagram 6.
15. Tighten and secure all screws, bolts and nuts used
throughout this assembly procedure.
O L L E Y A S S E M
Diagram 4.
Side burner to be installed on
left side of barbecue
Diagram 5.
Diagram 6.
B L Y
Side
burner
Side
shelf
Fat/grease
draining
tray
Fat/grease
receptacle
9