Download
Share
Print this page
Rinnai GT4SFD Operating And Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Rinnai Manuals
  4. Grill
  5. GT4SFD
  6. Operating and assembly instructions manual
Rinnai GT4SFD Operating And Assembly Instructions Manual

Rinnai GT4SFD Operating And Assembly Instructions Manual

Portable gas barbecues
Hide thumbs

Advertisement

Quick Links

Download this manual
Portable Gas Barbecues
Operating and assembly instructions
FOR YOUR SAFETY
IF YOU SMELL GAS
1.Shut off gas to the appliance,
if possible.
2.Extinguish any open flame.
3.Open hood.
4.If odour continues,
immediately call your gas
supplier or fire department.
GT4SFD
FOR YOUR SAFETY
1.Do not store or use
petrol or other flammable
vapours and liquids in the
vicinity of this or any other
appliance.
2.A gas cylinder not connected
for use must not be stored
in the vicinity of this or any
other appliance.
IGTI4SBS
These instructions are a
guide to assembling and
using the
GT4SFD
,
barbecue.
IGTI4SBS
Please read carefu
retain for future reference.
Only to be used outdoors.
Illustration may vary from barbecue
contained in carton.
,
lly, and

Advertisement

loading
Need help?

Need help?

Do you have a question about the GT4SFD and is the answer not in the manual?

Questions and answers

Related Manuals for Rinnai GT4SFD

Summary of Contents for Rinnai GT4SFD

  • Page 1 Portable Gas Barbecues Operating and assembly instructions GT4SFD IGTI4SBS These instructions are a FOR YOUR SAFETY FOR YOUR SAFETY guide to assembling and 1.Do not store or use IF YOU SMELL GAS using the GT4SFD petrol or other flammable 1.Shut off gas to the appliance, vapours and liquids in the barbecue.
  • Page 2 GT4SFD IGTI4SBS...
  • Page 4 be properly converted from the factory built LPG. Contact...
  • Page 6 Input MJ/h Jet mm(Hi/Low) Input MJ/h Jet mm(Hi/Low)
  • Page 7 GT4SFD 1. Study the assembly diagram first then identify separate parts into groups. 2 . DONOT TIGHTENBOLTSUNTILALLFITTINGSAREIN POSITION, UNLESS SPECIFIED. Install Trolley Side Panels onto Trolley Bottom Panel (Trolley Panel-left) (Trolley Bottom Panel) (Trolley Panel-right) Phillips Head Screw 1/4"x1/2" Qty.4...
  • Page 8 Install Trolley Separation Panel (Separation Panel) Phillips Head Screw 3/16"x3/8" Qty.4 Part # S112G03061 Flange Nut 3/16" Qty.4 Part # S312G03061 Install Door Stop Plate (Door stop plate-upper) (Door stop plate-lower) Countersunk Flat Head Screw 3/16"x3/8" Qty.2 Part # S142G03061 Phillips Head Screw M5x10MM Qty.2 Part # S112M05101...
  • Page 9 Install The Barbecue head to the trolley - Note:lnstallation requires two persons Remove all componets from the barbecue head. - Partially install the screws to the underside of the barbecue - Locate the screw head into the keyholes on the top face of the trolly side panels,slide back to lock into posilion,tighten screws. Phillips Head Screw 1/4"x1/2"...
  • Page 10 Install Side Shelves Install the screws onto the side shelf brackets and tighten using 2 bolts 1/4"x23/32". See Fig. 1 Attach the side shelf over the screws. Align the holes on the side shelf bracket and the holes on the side shelf, insert 2 bolts 1/4"x23/32" and tighten securely.
  • Page 11 IGTI4SBS CAUTION : To assemble this barbecue, you should obtain assistance from another person when handling some of the larger and heavier pieces. Assemble Left Cabinet Panels (Left cabinet-rear panel) Phillips Head Screw 3/16"x3/8" Qty. 6 Part # S112G03064 Front Flange Nut 3/16"...
  • Page 12 Install Level Adjusters and Door Hinge Bracket onto Left Cabinet Bottom Shelf Countersunk Flat Head Screw 3/16"x1/4" Qty. 2 Part # S142G03044 (Door Hinge Bracket) (Level Adjuster) Install Storage Shelf onto Left Cabinet Install 2 Bolts B onto the Left and Right Pane , rear and tighten securely using 2 Flange Nuts 3/16".
  • Page 13 Install Front Bracket, Bowl Support Bracket and Left Side Shelf onto Left Cabinet Flange Nut 3/16" Phillips Head Screw 3/16"x3/8" Qty. 2 Part # S112G03064 Flange Nut 3/16" Qty. 2 Part # S312G03064 (Left cabinet-front bracket) (Bowl Suppont Bracket-left) Phillips Head Screw 1/4"x3/8"...
  • Page 14 Assemble Right Cabinet Panels Phillips Head Screw 3/16"x3/8" Qty. 6 Part # S112G03064 Flange Nut 3/16" Qty. 6 Part # S312G03064 (Right Cabinet-rear panel) (Right Cabinet-right panel) (Right Cabinet-left panel) Install Right Cabinet Bottom Shelf Phillips Head Screw 1/4"x3/8" Qty. 4 Part # S112G04064 (Right Cabinet-bottom panel)
  • Page 15 Install Level Adjusters, Door Hinge Bracket and Storage Shelf onto Right Cabinet Install Level Adjusters onto the bottom of the Right Cabinet and tighten securely by Hand. Install Door Hinge Bracket onto the Bottom Shelf using 2 Countersunk Flat Head Screws and tighten securely.
  • Page 16 Install Right Cabinet Separation Panel Bracket Phillips Head Screw 3/16"x3/8" Qty. 4 Part # S112G03064 (Separation panel Bracket-left) (Separation panel Bracket-right) Install Partition Panel and adjust Level adjusters Attach the four(4) Phillips Head Screws 1/4"x3/8" to Left and Right Cabinet panels. Tighten the screws only halfway, then place the Partition Panel over the screws and tighten all the screws securely.
  • Page 17 Install Barbecue Head and Replace Support Bracket Remove all cooking components from the Barbecue Head. With the help of your assistant, lift Barbecue Head and place onto the Bowl Support Brackets (see Fig.4-1). NOTE: The hands should be placed on the back top of grill lid and under of control panel, upper when lifting the Barbecue Head.
  • Page 18 Secure Head to cabinets Phillips Head Screw 1/4"x1/2" Qty. 4 Part # S112G04084 Inst all Doors & Support Bracket. Install the support bracket into the "U" shape hole in the cabinet side panel. Place the Door Assembly into the Upper door bracket, Press the spring lever mechani sm at the bottom of the door and position over the lower door bracket opening.
  • Page 19 Install Side Burner Connection Hose Connection to the gas cylinder 14-1 Side Burner Regulator NOTE: Pass regulator through Connection hose to gap in the front RH corner of cabinet. Leak check connections before use. Refer pages 3&4...
  • Page 20 Install Grease Tray Pull out the Grease Tray Bracket. Place the Grease Tray into the Grease Tray Bracket as shown. Push the Grease Tray Bracket back into position. Refer to page 28 for "Maintenance/Cleaning The Grease Tray" (Grease Tray) (Grease Tray Holder) Install Gas Cylinder refer to page 21 for more information After connection of the side burner hose...

  • Page 21: A S S E M B L Y - G E N E R A L

    A S S E M B L Y – G E N E R A L Install Igniter Battery Familiarise yourself with the general information and Remove Igniter Cap from Control Panel. safety guidelines located at the front of this booklet. Place supplied AA battery into the Igniter Check to see that gas cylinder is filled and that end of Slot with positive pole facing you.
  • Page 22 Spark Gap 4-5mm Spark Electrode Tip Spark Receiver...
  • Page 23 Cooking Rack/Secondary Hook GT4SFD model only GT4SFD model IGTI4SBS model...

  • Page 24: Operation

    -IGTI SBS model only MAIN BURNER IGNITION BACK BURNER Open barbecue hood before attempting to light burners. NOTE: The location of the back burner makes it more susceptible to wind conditions that will Set burner control knobs to ‘OFF’ and open the decrease the performance of your rotisserie cooking.
  • Page 25 MANUAL LIGHTING If for some reason, igniters fail to produce a spark at the electrode, FLARE-UPS barbecue can be lit carefully with a match. Remove the hotplate/grills plates light the burner with a match. The fats and juices that drip from the meat may cause flare- ups.
  • Page 26 • The easiest foods to balance are those of uniform shape ROTISSERIE and texture. To test if the food is balanced correctly when secured, place the ends of the rotisserie skewer loosely Rotisserie is available as an optional extra from your place in the palm of your hands.
  • Page 27 IF THE BARBECUE FAILS TO LIGHT SHOULD A FLASHBACK FIRE OCCUR IN OR AROUND THE BURNER TUBES, FOLLOW THE INSTRUCTIONS BELOW. Turn gas off at source and turn burner control knobs to FAILURE TO COMPLY WITH THESE ‘OFF’. Wait at least five (5) minutes for gas to clear, then INSTRUCTIONS COULD RESULT IN A FIRE retry.
  • Page 28 " " CONTENTS OF GREASE DRAINING TRAY MAY BE VERY HOT DURING COOKING. ALLOW TO COOL COMPLETELY BEFORE DISPOSING OF THE CONTENTS. AFTER CONTINUOUS USE, FAT AND/ OR COOKING JUICES MAY BUILD UP. TO AVOID ANY FLARE-UPS, IT IS RECOMMENDED THAT THE GREASE TRAY BE EMPTIED REGULARLY.
  • Page 30 Orifice Gas Valve Assembly Burner Tube Foot Burner Port Burner Tube...
  • Page 32 D I A G R A M GT4SFD...
  • Page 33 Model GT4SFD DESCRIPTION Part No. Hood Ass embly P0014742E4 Temperature Gauge P00601484B P00213047M Hood Handle Badge P00415006C P00307061E Hood Handle Seat -Left Hood Handle Seat -Right P00308061E P05518002I Hood Rubber Pad Bowl Set P007139464 Door stop plate-upper P055101454 Door stop plate-lower...
  • Page 34 D I A G R A M IGTI4SBS...
  • Page 35 Model IGTI4SBS DESCRIPTION Part No. Hood Assemb ly P0014742E4 Temperature Gauge P00601471B Hood Handle P00212008M Hood Hand le Decorative P00213051D P00415006C Badge Hood Handle Seat-Left P00307071E Hood Handle Seat-Right P00308071E Hood Rubber Pad P05518002I Bowl Set P007139864 Separation panel bracket-left P010011084 Bowl Grease Shield P069010304...
  • Page 36 RINNAI NEW ZEALAND. LTD 105 Pavilion Dr, Airport Oaks, Mangere Head Office: Manukau 2150. PO Box 53177, Airport Retail Centre Manukau 2150. Tel (09) 257 3800. Fax (09) 257 3899. info@rinnai.co.nz www.rinnai.co.nz www.youtube.com/rinnainz For your local Service Centre 0800 RINNAI (0800 746624).

This manual is also suitable for:

Igti4sbs