T R O L L E Y A S S E M B Ly - Rinnai 4 burner Gourmet Customer's Operating And Assembly Instructions

8
T R
TROLLEY ASSEMBLY
1. Study the assembly diagram first then identify and
separate parts into groups.
2. DO NOT TIGHTEN BOLTS UNTIL ALL
FITTINGS ARE IN POSITION.
3. Place the trolley legs with black castor securing
/mounting blocks, on their narrow sides, together
on a clean surface approximately 400 mm apart.
4. Position a right-angled brace between the legs as
shown in diagram 1 and connect each leg to the brace
using the 20 mm screws provided.
Refer diagram 1.
5. Repeat steps 3 & 4 using the remaining two leg
pieces.
6. Locate the base tray into the openings provided
in each leg as shown in diagram 1. Secure the base
tray using the cap nuts provided. Finger tighten
only.
7. Carefully place the partly assembled trolley to a
laying down position. Secure the castors into the
legs with the pre-fitted castors seats in them.
Fasten firmly using a shifter.
8. Secure wheels to the other legs (with axle holes),
using the long axle bolts and nuts provided. Be
sure to insert the washer onto the axle bolt so that
it is positioned between the trolley leg and securing
nut. Clip hubcaps into position in centre of wheels.
The partly assembled trolley is now ready to
connect with the barbecue body.
9. Remove the grillplates and flametamer from within
the barbecue, and position the barbecue on its rear
side as shown in diagram 3. (Diagram shows barbecue
without hood for simplicity).
Manoeuvre the partly assembled trolley into
position with a leg assembly on each side of the
barbecue body. Ensure that the wheels are on the
left side of the barbecue body.
10. Align the 3 openings of the trolley legs with the 3
openings in the sides of the barbecue body.
11. Secure the trolley leg assemblies to the barbecue
body via the openings lowest in the legs and closest
to the base tray, using the bolts provided. In some
cases, the nuts to be used are pre-welded to the
inside of the barbecue body side panels.
O L L E Y A S S
Diagram 1.
Base tray
Diagram 2.
Castors style may
vary from model to
model.
Diagram 3.
Shown without
hood for
simplicity.
E M B L
Right
angled brace
Trolley
axle
legs
Ensure wheels are assembled
to left side of barbecue.
Barbecue body
8
Y
Trolley legs
with black
securing/
mounting
blocks
Hubcap
Wheel