Table of Contents
Advertisement
Safety Instructions
General
This product is for indoor use only.
Read all of these instructions. Save them for future reference.
Follow all warnings and instructions marked on the device.
Do not place the device on any unstable surface (cart, stand, table,
etc.). If the device falls, serious damage will result.
Do not use the device near water.
Do not place the device near, or over, radiators or heat registers.
The device cabinet is provided with slots and openings to allow for
adequate ventilation. To ensure reliable operation, and to protect
against overheating, these openings must never be blocked or
covered.
The device should never be placed on a soft surface (bed, sofa,
rug, etc.) as this will block its ventilation openings. Likewise, the
device should not be placed in a built in enclosure unless adequate
ventilation has been provided.
Never spill liquid of any kind on the device.
Avoid circuit overloads. Before connecting equipment to a circuit,
know the power supply's limit and never exceed it. Always review
the electrical specifications of a circuit to ensure that you are not
creating a dangerous condition or that one doesn't already exist.
Circuit overloads can cause a fire and destroy equipment.
Unplug the device from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
The device should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of
power available, consult your dealer or local power company.
To prevent damage to your installation it is important that all devices
are properly grounded.
The device is designed for IT power distribution systems with 230V
phase-to-phase voltage.
Appendix
15
Advertisement
Table of Contents
