Requirement
Console
A VGA monitor
A USB mouse
A USB keyboard
Components
KA7171 Front View
No.
Component
1
PC Port
2
Remote LED
3
Local LED
4
Operating Mode
Selection
Pushbutton
1
2
Description
Plug the appropriate connectors on the USB-
PS/2 KVM cables set to a local computer.
Lights green to indicate that the local console
access is active.
Lights green to indicate that the KA7171 link to
the KVM switch is active. Flashing indicates
that the KVM switch is sending/receiving data
to/from the console.
Push to select between Remote / Local
modes.
Chapter 1. Introduction
4
3
3