KA7171 / KA7171AK User Manual
F
eatures
KA7171 / KA7171AK
Cat 5e/6 cable connects the device and KVM switch
Supports computers with PS/2 or USB keyboards and mice
Local console operation - control your system from the extended
USB keyboard, USB mouse, and monitor via local console
Pushbutton operating mode selection for privileged console control
Built-in ASIC for greater reliability and compatibility
USB overcurrent detection and prevention
Built-in ESD protection and surge protection
Superior video quality - supports resolution up to 1920 x 1200
(Reduced blanking*)
Supports VGA, SVGA, SXGA, UXGA, WUXGA and
multisyncmonitors; local monitor supports DDC; DDC2; DDC2B
Easy to install - no software required - connecting cables to the
devices is all it takes
Note: This maximum resolution may vary depending on the
transmission distance. For more details, please refer to the product
pages of the connected KVM switches.
2XRT-0015G KVM over IP Access Control Box
Note: 2XRT-0015G KVM over IP Access Control Box only comes in the
KA7171AK package.
Users at the Tx local console can enable / disable Rx control
privilege by simply pressing a control button
Plug and play - no software installation required on either side
USB bus-powered design - no external power adapter required
Easy to operate
Cable length reaches 5m for more flexible installation
2