Table of Contents
Advertisement
KA7171 / KA7171AK User Manual
Installation
For the installation, please refer to the installation diagram and
procedures shown below:
6
PS/2
5
Note: The numbers shown in the disgram are the installation steps
corresponding directly to the steps below.
1. Plug the cables from the local console devices (mouse, keyboard,
monitor) into their ports on the Console section on the rear of the
KA7171 / KA7171AK Unit.
Note: The KA7171 rear panel is similar to the KA7171AK, except that it
does not have the (no.4) PRIORITIZED CONTORL Port, (no.5) the RS-
232 Serial Port, and the (no.6) 5V Port.
2. Plug the appropriate connectors on the USB-PS/2 KVM cables
supplied with this unit into their ports on the KVM section on the
front of the KA7171 / KA7171AK Unit.
10
Cat 5e cable to KVM Switch
4
1
2XRT-0015G
USB-PS/2 KVM Cable Set
Local PC
3
2
Advertisement
Table of Contents
