PHYWE Cobra4 Operating Instructions

PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
37079 Göttingen
Germany
Tel. +49 (0) 551 604-0
Fax +49 (0) 551 604-107
E-mail info@phywe.de
Internet www.phywe.de
Operating Instructions
The unit complies
with the applicable
EC regulations
TABLE OF CONTENTS
1

SAFETY INSTRUCTIONS

2 Purpose And Characteristics
3 Functional And Operating Elements
4 OPERATING INSTRUCTIONS
5 Handling
6 Technical Data
7 Scope Of Supply
8 Warranty
9 Disposal
1 SAFETY INSTRUCTIONS
Read the operating instructions thoroughly and com-
•
pletely prior to starting the unit. Please read also the op-
erating instructions of the measurement data recording
device that is used (Cobra4 Wireless-Link, USB-Link,
www.phywe.de, © All rights reserved
Cobra4 Sensor-Unit Sound Level
Fig. 1: 12669-00 Cobra4 Sensor-Unit Sound Level
Mobile-Link, or Junior-Link). This is important for your
own protection and for avoiding damage to the unit.
Only use the unit for its intended purpose.
•
The unit is intended solely for use in dry rooms where
•
there is no risk of explosion.
Protect the Cobra4 Sensor-Unit Sound Level against
•
dust, moisture, and vapours. Clean the unit with a slightly
moist, lint-free cloth. Do not use any aggressive cleaning
agents or solvents.
Ensure that no liquid can penetrate the housing. Other-
•
wise, the Cobra4 Sensor-Unit Sound Level may be dam-
aged.
When using the unit outdoors, ensure that no rain or
•
splash water can penetrate the housing.
Do not open the unit.
•
Connect the data output of the Cobra4 Sensor-Unit
•
Sound Level only to the intended measurement data re-
cording devices.
Based on today's state of software development, it is im-
•
possible to guarantee that a product is completely free
from errors or defects.
This is why PHYWE Systeme GmbH & Co. KG does not
accept any liability for damage that results from the in-
stallation or use of this unit.
12669-00
1
12669-00 / 0214