ICON Health & Fitness NORDICTRACK RW 900 User Manual page 9

Hide thumbs Also See for NORDICTRACK RW 900:
Table of Contents

Advertisement

8. While a second person holds the Console (75)
near the Console Bracket (108), connect the
wires (A) on the Console to the Neck Wires (112)
in the Neck (76).
Insert the excess wires into the Neck (76) one
at a time; insert each wire as far as possible into
the Neck. Tip: Insert the wire with the larger
connector into the Neck first.
Tip: Avoid pinching the wires. If necessary,
tilt the Neck (76) upward to make this step
easier. Attach the Console (75) to the Console
Bracket (108) with four M4 x 16mm Machine
Screws (93); start all the Machine Screws, and
then tighten them.
9. Plug the Power Adapter (107) into the receptacle
on the frame of the rower.
Note: To plug the Power Adapter (107) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 10.
10. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
8
108
75
Avoid
pinching
the wires
9
9
93
76
93
112
A
107

Advertisement

Table of Contents
loading

Table of Contents