Table of Contents
Advertisement
"Deleting a console configuration"
You might need to delete an existing local console to meet your specific needs while using Operations
Console. You must be a member of the Administrators group to delete a console.
Changing a local console:
About this task
To change an existing local console, follow these steps:
1. If your local console is connected to a system, disconnect it as follows; otherwise, go to step 2:
a. Select the configuration name.
b. From the Connection menu, click Disconnect. The connection status shows Disconnecting.
c. Wait until the status shows Disconnected at the local console.
2. Select the configuration name.
3. From the Connection menu, click Properties.
4. Select the Configuration tab.
5. Make your changes and click OK.
Changing a local console on a network (LAN):
About this task
Important: If network data will be changed, you need to delete and re-create the connection
configuration. Also, Operations Console should be closed and restarted before attempting to
connect a new configuration. This action will remove all cached values associated with any
old configurations.
1. Select the configuration name.
2. Click Disconnect. Wait until the status shows Disconnected at the console.
3. Select the configuration name.
4. From the Connection menu, click Properties.
5. Select the Configuration tab.
6. Make your changes and click OK.
Deleting a console configuration
You might need to delete an existing local console to meet your specific needs while using Operations
Console. You must be a member of the Administrators group to delete a console.
About this task
Note: You may also use the Delete key on the keyboard. Just highlight the configuration you want to
delete and press the Delete key.
Related tasks
"Changing a console configuration" on page 46
You might need to change an existing local console to meet your needs while using Operations
Console.
Deleting a local console:
About this task
To delete an existing local console, follow these steps:
1. If your local console is connected to a system, disconnect it as follows; otherwise, go to step 2:
a. Select the configuration name from the Operations Console window.
b. From the Connection menu, click Disconnect. The connection status shows Disconnecting.
47
Operations Console
Advertisement
Table of Contents
Troubleshooting
