Konica Minolta AIRe Lens User Manual page 89

4.11 Wireless LAN connection setting
3
Input information of wireless LAN access point to be connected with.
% Use wireless LAN access point information as instructed by the network administrator.
A red-text error message appears if there are any errors in the input items.
% If an error message appears, check the input for errors.
Item
SSID
Security Mode
Password
*1
: Excluding slash (/), tilde (~), and non-displayable ASCII codes.
AIRe Lens
Settings
Up to 32 characters, consisting of sin-
gle-byte alphanumeric characters and
*1
symbols
WEP
WPA/WPA2-PSK
WPA/WPA2-Enterprise
5 to 64 characters, consisting of sin-
gle-byte alphanumeric characters (AS-
*1
CII)
Description
Input the SSID (network name) of the
wireless LAN access point to be con-
nected with.
Select a security protocol in accord-
ance with wireless LAN access point
settings.
Input the password for connecting
with the wireless LAN access point.
If [WEP] is selected for "Security
Mode", input a password from 5 to 32
characters long.
If [WPA/WPA2-PSK] is selected for
"Security Mode", input a password
from 8 to 64 characters long.
Note that this item is not displayed
when [WPA/WPA2-Enterprise] is se-
lected for "Security Mode".
4
4-21