Using The Aire Lens - Konica Minolta AIRe Lens User Manual

3
3.2

Using the AIRe Lens

This product can be used with the left eye or right eye as required. For information about how to check the
display and switch its position, refer to page 3-22.
3.2.1 Turning on power
%
Press the C-BOX power button to turn on power.
% Before turning on power, check that the C-BOX and the HMD are connected. Before use, check that
two batteries are loaded. (Power will not turn on unless there is a battery loaded in compartment (1).)
Turning on power will cause the C-BOX indicator to flash blue.
If the C-BOX indicator does not flash blue, it could mean that battery power is low or that C-BOX and the
HMD are not connected.
3.2.2 Turning off power
7CAUTION
-
Do not press the power button for more than eight seconds to turn off.
-
Forcing the product to power down may cause stored data and settings to be deleted.
%
To turn off power, long press (three seconds) the power button.
% Long pressing the power button to turn off power causes the C-BOX indicators to go out. Release
the power button as soon as the C-BOX indicators go out.
% The battery indicators go out when this product is completely powered down. Do not load or remove
batteries until the battery indicators go out.
3-10
Long press for three seconds
Running When this indicator goes out...
Using the AIRe Lens
Release
AIRe Lens
3.2