Konica Minolta AIRe Lens User Manual page 30

3
4
Adjust the width of the HMD so it does not slip off of the top of the glasses.
% Place the HMD onto glasses, and confirm that the contacts are riding on the temple of the glasses.
If they aren't, adjust the HMD to match the width of the glasses. Make sure that the left and right
sides are symmetrical with each other.
Horizontal width adjustment details
% 1: Half close the temple.
% 2: Grasping the temple within the areas indicated by the dotted lines, slide it left or right.
NOTICE
Note that grasping the temple outside of the indicated areas when sliding it may damage the HMD.
5
People who don't wear glasses. Put on the nose pad attachment.
3-8
Getting ready to use the AIRe Lens
Width adjustment
Left side
Push here when it remove
Right side
3.1
AIRe Lens