Konica Minolta AIRe Lens User Manual page 75

4.1 Operating environment
3
Open the IPv4 properties screen.
% On the screen that was opened in step 2 of this procedure, select "Internet Protocol Version 4
(TCP/IPv4)", and then click the [Properties] button.
4
Set the IP address.
% Select "Use the following IP address" on the screen opened in step 4 of this procedure and then
input the information below into the IP address and subnet mask boxes.
IP address: 192.168.2.X
Subnet mask: 255.255.255.0
*1
: For "X" specify any value other than 250 in accordance with the computer's environment.
5
After inputting the information, click the [OK] button.
This completes the IP address setting procedure.
AIRe Lens
*1
4
4-7