Using The Gesture Sensor - Konica Minolta AIRe Lens User Manual

3.3 Operation procedures
3.3.2

Using the gesture sensor

When the gesture sensor is turned on, moving a hand upwards, downwards, leftwards, or rightwards in front
of the HMD will perform the corresponding A, B, C, or D button short press operation. Holding a hand over
the HMD (for two seconds) will perform an E button short press operation.
In order to ensure that the sensor can correctly recognized each gesture, move the hand slowly with the palm
close to the HMD. Note that a gesture cannot be recognized correctly if hand movement is too fast.
When shipped from the factory, the gesture sensor is turned off. Long press the F1 (yellow) button to turn
on/off the gesture sensor.
AIRe Lens
3
3-17