Removing The Product - Konica Minolta AIRe Lens User Manual

3.2 Using the AIRe Lens
% If changes in brightness are annoying
Switch to Manual brightness adjustment (Home Screen Setup).
1. Change Auto % Manual (p. 3-40).
Setup % Brightness % Auto Control % OFF
2. Configure the brightness (fixed) setting (p. 3-40).
Setup % Brightness % Level (Manual)
When shipped from the factory, brightness adjustment is set to Auto.
3.2.4

Removing the product

1
Long press (three seconds) the C-BOX power button to power down.
% Refer to page 3-10.
2
While pressing the headband button, loosen the headband.
3
Remove the HMD from the head.
4
Fold the HMD temples and insert them into the holder on the shoulder strap.
5
Remove the shoulder strap.
6
Remove the glasses.
AIRe Lens
3
3-15