Bluetooth Setting - Konica Minolta AIRe Lens User Manual

4

4.3

Bluetooth setting

The Bluetooth menu item can be used to pair with and unpair from a Bluetooth device.
1
Click the Bluetooth menu item to display the Bluetooth page.
2
Enter a Bluetooth device search standby state and click the [Scan] button in the center of the page to
search for pairable Bluetooth devices.
*1: Detectable devices are as follows.
Supporting A2DP profile
The following bar code reader set with SPP profile.
KOAMTAC: KDC200 Series
DENSO WAVE: SF1-BB
3
When the desired Bluetooth device name and address are displayed, click [CONNECT] button.
If pairing is successful, the [CONNECT] button becomes disabled (dimmed) and [DISCONNECT] button
becomes enabled.
4
To unpair from a device, click [DISCONNECT] button.
If unpairing is successful, the [DISCONNECT] button becomes disabled (dimmed) and [CONNECT] but-
ton becomes enabled.
% If Bluetooth pairing cannot be performed, turn the power of the Bluetooth device off % on again and
then try pairing again.
4-10
*1
Bluetooth setting 4.3
AIRe Lens