Konica Minolta AIRe Lens User Manual page 74

4
4
Confirm that the device driver is installed.
% Confirm that the new device has been added to Windows Device Manager/Network Adapters.
This completes device driver installation.
IP address setting
Set an IP address on the computer to perform communication with the AIRe Lens.
1
Open the "Network Connections" screen.
% In the Windows Control Panel, select Network and Sharing Center/Change adapter settings.
2
Open the properties screen of the "USB Ethernet/RNDIS Gadget" network adapter.
% On the screen that was opened in step 1 of this procedure, right-click the icon of the network adapt-
er named "USB Ethernet/RNDIS Gadget".
% Click [Properties] on the displayed screen.
4-6
Operating environment
AIRe Lens
4.1