Table of Contents
Advertisement
7.4.2
EIB parameterization
7.4.2.1
LOGO! configuration
The dialog screen shown below is used to change LOGO! configuration settings.
Figure 7-7
LOGO! configuration
Configuration parameters
The individual configuration parameters are described below:
● Number of digital inputs/outputs, locally on the LOGO! and virtually via EIB
● Number of analog values, locally on the LOGO! and virtually via EIB
● Time and date
CM EIB
Manual, 03/2010, J31069-D1262-U002-A4-7618
The parameters for the digital EIB inputs/outputs are shown or hidden depending on this
information.
The parameters for the analog EIB inputs/outputs are shown or hidden depending on this
information.
Here, the functionality can be set to time master (primary), time slave (secondary), or
inactive.
Functions
7.4 EIB communication
35
Advertisement
Table of Contents
