Table of Contents
Advertisement
Functions
7.4 EIB communication
Input with monoflop behavior, preferred state = 1
Monoflop time = Tm
Figure 7-2
Input with monoflop behavior, preferred state = 0
Figure 7-3
Normal input without preferred state
Figure 7-4
I24 can be configured as bus status, i.e. if communication to the EIB is OK, it contains the
value 1, otherwise 0.
An error on the EIB will only be detected after approx. 30 seconds.
30
Input with monoflop behavior, preferred state = 1
Input with monoflop behavior, preferred state = 0
Normal input without preferred state
Manual, 03/2010, J31069-D1262-U002-A4-7618
CM EIB
Advertisement
Table of Contents
