Table of Contents
Advertisement
Application example
Figure 7-1
1. To represent the LOGO! inputs (I1 to I8 and I9 to I12) as outputs on the EIB, these must
2. Links (basic functions BF/special functions SF) within the LOGO! application are usable
3. To address the LOGO! outputs (Q1 to Q4 and Q5 to Q8) directly via bus communication,
CM EIB
Manual, 03/2010, J31069-D1262-U002-A4-7618
Application example
be connected in the LOGO! application with free EIB outputs (Q9 to Q16).
(e.g. checkback signal).
they must be linked in the LOGO! application with free EIB inputs (I13 to I24).
Functions
7.3 EIB inputs/outputs
27
Advertisement
Table of Contents
