baltur BGN 60 P Instruction Manual page 40

for model BGN 40 P ÷ 250 P (steel fixing flange)
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Elastic collar
for model BGN 300 P - BGN 350 P (Aluminium coupling flange)
REMARKS
When tightening the flange, it is important to do it evenly so that the inner faces are parallel between them.
Since the locking system is highly efficient, do not tighten the nuts too much.
During this operation (tightening of the flange locking nuts) keep the body of the burner lifted so that the
combustion head is kept in a horizontal position.
APPLICATION OF THE BURNER TO BOILER
5 - Stud bolt
6 - Locking nut with washer
7 - Nut and washer for fastening the first flange
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Stud bolt
5 - Locking nut with washer
EN
39