Parts Of The Microscope; Assembly And Set Up; Using The Microscope - Swift SW200 User Manual

II. Parts of the microscope
III. Assembly and set up
Carefully remove the microscope from the box and set it on a sturdy, flat surface.
Remove the plastic cover from the eyepiece holder on the microscope's head, then
place an eyepiece into the holder. Locate the power adapter and attach it to the
microscope, then plug it in. Turn the microscope on by pressing the power button.
IV. Using the microscope
Turn the microscope on and use the illumination intensity control dimming handwheel to
set the lamp on the lowest brightness setting.
Secure a slide via the slide clips on the stage.
3