Troubleshooting Within The Network - Medion ERAZER Series Instruction Manual

Troubleshooting within the Network

Why does the network environment not show the releases?
The network environment is delayed in time. Check the release by searching
for the respective computer name.
Why does an error message appear when I click on the network environment?
The computer name must be unique on the network and may not be the
same as the task group.
It appears that the network boards are unable to communicate. What might be the
problem?
Maybe one of the used network boards works with a different speed (e. g.
10 instead 100 Mbit) and your network computer is unable to recognize this.
If necessary, set the network driver to the compatible speed.
If two PCs should be linked you require a cross-link cable, otherwise use a
patch cable.
In addition, check the protocols and the configuration.
The data transmission is incorrect or very slow. What might be the problem?
Maybe you have the wrong cable (UTP / CAT3 or lower) or the problem is
the proximity of a power cord or another source of interference.
For further hints on troubleshooting refer to the Windows help under "Network errors".
44