Table of Contents
Advertisement
4. Setup
Please follow the steps described below to set up this product.
Explained in
the User's Guide
If install OS into built-in
disk.
Explained in
the User's Guide
of the CPU Blade
Notice
Install the card
Install this product in the CPU Blade.
Label WWPN address
Label WWPN address on the Blade management sheet.
Install the CPU Blade
Install the CPU Blade in the Blade Enclosure.
Preparations/
Change BIOS settings
Prepare LUN for OS and change BIOS setting.
OS install
Install the driver
Install the driver for your operating system.
Refer to the User's Guide that came with CPU Blade for how to install an operating
system on Fibre Channel device. Contact your sales agent if necessary.
->
See User's Guide of the CPU Blade
- 35 -
-> Page 36
-> Page 37
-> page 37
If install OS into
FC storage device.
-> page 40
Advertisement
Table of Contents
