Table of Contents
Advertisement
Emulex LightPulse BIOS Utility, ZB3.03a9
Copyright (c) 1997-2008 Emulex. All rights reserved.
Emulex Adapters in the System:
1. LPe1105-N:
2. LPe1105-N:
Enter a Selection: _
Enter <x> to Exit
Tips
4> When the menu is displayed, select the number of the port. Then, you see the information window.
Adapter 01:
LPe1105-N:
Port Name: 10000000 C92B6B74
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disabled
1. Configure Boot Devices
2. Configure This Adapter's Parameters
Enter a Selection: _
Enter <x> to Exit
<d> to Default Values
5> Transcribe 12 figures of WWPN/WWNN address which displayed.
Press <ESC> key to return to the menu of select port and go next port.
6> If you have finished to confirm all WWPN/WWNN address, enter "x" (Exit) to reboot the computer.
From EM card, WWPN of Port 0/1 are displayed as WWPN information of Port 1/2.
Tips
PCI Bus, Device, Function (02,00,00)
PCI Bus, Device, Function (02,00,01)
If the above menu is not displayed and the window has gone to the next
one, press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the
computer. Then, start the steps from the beginning.
The LPe1105-N of Function "00" is Port0 and Function "01" is Port1.
The above message sample is just for your reference. Some of them may
be different depending on the CPU Blade or its configurations.
PCI Bus, Device, Function (02,00,00)
I/O Base: 3000
Firmware Version: ZS2.72A2
Node Name: 20000000 C92B6B74
WWPN
<Esc> to Previous Menu
- 47 -
Port0
Port1
WWNN
Advertisement
Table of Contents
