NEC N8403-018 User Manual page 46

Fibre channel controller
Hide thumbs Also See for N8403-018:
Table of Contents

Advertisement

10> Enter 1(via WWPN). Then, you see Boot device's settings window again. Confirm that the top
item on the list is "USED".
Adapter 01: S_ID: 010400
List of Saved Boot Devices:
1. Used
DID:000000 WWPN:21000000 4C123456 LUN:00 Primary Boot
2. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
3. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
4. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
5. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
6. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
7. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
8. Unused
DID:000000 WWPN:00000000 00000000 LUN:00
Select a Boot Entry:_
Enter <x> to Exit
11> Press <ESC> key to return to the menu like:
Adapter 01:
LPe1105-N:
Port Name: 10000000 C92B6B74
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disabled
1. Configure Boot Devices
2. Configure This Adapter's Parameters
Enter a Selection: _
Enter <x> to Exit
<d> to Default Values
12> Select "2". Then, you see the settings window like:
Adapter 01:
LPe1105-N:
Port Name: 10000000 C92B6B74
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disabled
1. Enable or Disable BIOS
2. Change Default ALPA of this adapter
3. Change PLOGI Retry Timer (+Advanced Option+)
4. Topology Selection (+Advanced Option+)
5. Enable or Disable Spinup Delay (+Advanced Option+)
6. Auto Scan Setting (+Advanced Option+)
7. Enable or Disable EDD 3.0 (+Advanced Option+)
8. Enable or Disable Start Unit Command (+Advanced Option+)
9. Enable or Disable Environment Variable (+Advanced Option+)
10. Enable or Disable Auto Boot Sector (+Advanced Option+)
11. Link Speed Selection (+Advanced Option+)
Enter a Selection: _
Enter <x> to Exit
PCI Bus, Device, Function (02,00,00)
<Esc> to Previous Menu
PCI Bus, Device, Function (02,00,00)
I/O Base: 3000
Firmware Version: ZS2.72A2
Node Name: 20000000 C92B6B74
<Esc> to Previous Menu
PCI Bus, Device, Function (02,00,00)
I/O Base: 3000
Firmware Version: ZS2.72A2
Node Name: 20000000 C92B6B74
<Esc> to Previous Menu
- 44 -

Advertisement

Table of Contents
loading

Table of Contents