4. Setup
Please follow the steps described below to set up this product.
Explained in
the User's Guide
Explained in
Setup Card of Driver
Selection and Installation of Bracket
Selection of bracket to use for this product.
Confirm WWPN addresses (Port 0/Port 1)
Confirm WWPN addresses of this product for each FC port.
Install the card
Install this product in the computer.
Connecting Fibre Channel Devices
Connect Fibre Channel Devices to this product.
Install the driver
Install the driver for your operating system.
->
See the installation guide for your
operation system
-> Page 50
-> Page 52
-> Page 53
-> Page 55